Corvette Mods now offers a series of performance motor mounts for the high horsepower builds or the owner looking to replace a set on their way out.
We offer two options:
Solid Mounts or Urethane mounts
The solid mounts are a direct bolt-in replacement for worn stock mounts. They will fit just like the factory mount with no other modifications required. If you are looking at solid mounts, you already know the benefits and how they reduce engine movement to an absolute minimum which allows all the horsepower to be used at the rear wheels instead of being absorbed by drive train flex.
As with all solid motor mounts, the vibrations of the engine will be transferred into the vehicle. If your car is street driven and/or a daily driver we recommend you to see our polyurethane engine mounts. While stiffer than the factory mounts, they will isolate much of the engines vibrations without transferring into the vehicle. They are also strong enough to hold the most powerful of engines in place.
Our urethane mounts are a direct replacement for worn factory mounts. They will fit just like the factory mounts with no other modifications but are stiffer than the factory mounts which make them a good compromise between expensive/soft factory mounts and solid mounts.
What sets Ultra Mounts urethane mounts apart from our competition is our engine mounts have a two-part interlocking steel framework encased in urethane to give engine support in both directions of twist. When the engine tries to twist under acceleration the drivers side of the engine tries to lift, putting that mount in tension (pull apart) and the passenger side mount in compression (push together). Then when you gear down into a corner or to stop, these forces are reversed. Ultra Mounts are correctly designed and take both of these forces into account.