Our C3 Corvette 1968-1974 Reproduction Gas Tanks with O.L. Anderson Logo are manufactured with corrosion-resistant steel and have the same shape, indents, welds and connections as the original tanks.
Get true reproduction accuracy with these tanks stamped with the O. L Anderson Logo.
Available options with their corresponding fitment and features are listed below. Please use the drop down menu above to make your gas tank year and spec selection.
1968-1969E w/ 300HP, 350HP, or 390HP
Fitment:- 1968-1969 Early Corvettes w/ 300HP, 350HP, or 390HP
- (Changed Approximately July 29, 1969)
Features:- Correct Indents As Original
- With Passenger Side Vent Tube
- 18-Gallon Capacity
- Includes Gas Neck Gasket, Gas Neck Screws, Gas Tank Meter Gasket, and Gas Tank Meter Locking Ring.
1970-1974 All EXCEPT LT1Fitment:- All 1970-1974 Corvettes Except LT-1
Features:- With Side Bracket
- With Flat Metal Valve
- With E.E.C.
- With Vent Tube on Both Sides
- Correct Indents As Original
- 18-Gallon Capacity
- Includes Gas Neck Gasket, Gas Neck Screws, Gas Tank Meter Gasket, and Gas Tank Meter Locking Ring.
1968-1969E w/ 400HP, 435HP, or L88
Fitment:- 1968-1969E Corvettes Made Up To July 1969 With Special High Performance 427ci Engines L-68 (400 HP), L-71 (435 HP), and L-88 (430 HP).
Features:- Made Of Ni-terne Plated Steel
- O.L. Anderson Logo Indented In Bottom As Original
- Small Round Side Indentations
- No Tubes Or Brackets
- Unvented As Original
- 20-Gallon Capacity
- Dimensions: 38" X 15-3/4" X 11-3/4"
- Includes Filler Neck Screws, Filler Neck Gasket, Sending Unit Rubber O-ring, And Lock Ring.
1969L w/ Rochester Carb & 1970 w/o EEC & w/o LT1Fitment:- 1969 Corvettes Made Between August 1969-December 1969 With Rochester Carbs
- 1970 Corvettes Without Evaporative Emission Control (EEC) And Without LT-1
Features:- Made Of Ni-terne Plated Steel
- O.L. Anderson Logo Indented In Bottom As Original.
- Rectangular Side Indentations
- Passenger Side Gas Return Tube
- Vented As Original
- Valve In Top Of Tank
- 20-Gallon Capacity
- Dimensions: 38" X 15-3/4" X 11-3/4"
- Includes Filler Neck Screws, Filler Neck Gasket, Sending Unit Rubber O-ring, And Lock Ring.
1969L-1970 w/ 400HP, 435HP L88 (LT1 w/o EEC) Fitment:- 1969 Corvettes made Between August 1969-Decemeber 1969 With Special High Performance 427ci Engines
- 1970 LT-1 Corvettes Without Evaporative Emission Control (EEC)
- Includes L-68 (400 HP), L-71 (435 HP), L-88 (430 HP), and 1970 LT-1 (370 HP) Without EEC.
Features:- Made Of Ni-terne Plated Steel
- O.L. Anderson Logo Indented In Bottom As Original
- Rectangular Side Indentations
- No Tubes Or Brackets
- Vented As Original
- Valve In Top Of Tank
- 20-Gallon Capacity
- Dimensions: 38" X 15-3/4" X 11-3/4"
- Includes Filler Neck Screws, Filler Neck Gasket, Sending Unit Rubber O-ring, And Lock Ring.
1970-1972 LT1 w/ EEC Fitment:- 1970-1972 LT-1 Corvettes With Evaporative Emission Control
- Includes 1970 LT-1 Corvettes With EEC And 1971-1972 Corvette With LT-1.
Features:- Made Of Ni-terne Plated Steel
- O.L. Anderson Logo Indented In Bottom As Original
- Rectangular Side Indentations
- Driver's Side Tube And Bracket For EEC
- Vented As Original
- Valve In Top Of Tank
- 20-Gallon Capacity
- Dimensions: 38" X 15-3/4" X 11-3/4"
- Includes Filler Neck Screws, Filler Neck Gasket, Sending Unit Rubber O-ring, And Lock Ring.
Note: Due to the weight and/or dimensions of this item, additional freight charges will be applied at checkout.
My Cart [0]