If you want to save a little money on the trailing arm repair for your 1968-1982 Corvette, this rebuilt trailing arms assembly is just as good as a brand new set.
Installation of this professionally rebuilt version of trailing arms is somewhat difficult but can be done with the right knowledge and safety measures by you in your garage.
You start your replacement by jacking up your C3 and continue by putting the T-arm in the frame pocket, bolt the half shafts up, install the strut rods and mount the shocks. Once that is finished, put the parking brake cable and the caliper with the hard line that you will connect a rubber flex line to. After applying the rear spring, bleeding the brake system and adding your rear sway bar end links after you lower your 'Vette, it is imperative that you align your Corvette.
Order this rebuilt Trailing Arm assembly and your Corvette brake system will work just like new.
Make a year, side and transmission type selection in the drop-down menu above.
Note: Brake Rotors Not Included
Note: Due to the weight/dimensions of this item, additional freight charges will be applied at checkout.