A&A Corvette Performance is an independent manufacturer of custom supercharger systems for the C5 and C6 corvette, exclusively. Our systems have evolved into the most technologically advanced centrifugal systems available today. With over 500 systems on the road and hundreds of additional hours spent analyzing how every part of the system could be potentially improved, it has evolved into the finest system available. Look closely at our system vs. all others. The fit and finish of all components is second to none. This commitment to aesthetics carries forward in the same commitment to function.
Our bracket and pulley design offers excellent alignment and belt wrap. This is essential in any supercharger system and is unsurpassed by any other manufacturer. Our intercooler design also differs from any other. Not only are our intercoolers as large as practical for a Corvette, but the placement and attention given to airflow management is unmatched. An intercooler must have as much ambient airflow through the core area as possible to be efficient. Our design is the only one that is 100% exposed to frontal airflow either directly (C6) or through the use of directional scoops (C5). Not one square inch of either intercooler is shrouded by the frame or bodywork. Airflow through the rear of the intercooler is also important. Most designs place the intercooler tightly against the radiator and air conditioning condenser. We place our intercoolers with a large space between these components which aids in airflow through the intercooler as well as airflow to the radiator and condenser. The inlet duct from our high flow air filter to the supercharger inlet is also designed with superior airflow in mind. The curves are smooth and cross sectional area is large. This all translates into lower inlet temps and more power output.Trim Specification Selection:
Vortech V-2 head units are similar to the V-1 superchargers where the supercharger will require an oil feed line and oil drain line. The major difference is they are using helical gears inside of the gear casing. What are helical gears? Helical gears are gears that are cut diagonally instead of straight. These Helical gears help eliminate a lot of the gear noise that is common in the Vortech V-1 superchargers. You will still hear the whining sound, but the chattering sound caused by the gears is significantly quieter. This is why Vortech names their V-2 compressors SQ, which stands for, “Super Quiet.”
The Vortech V-3 supercharger is the latest release in superchargers from Vortech. Unlike the Vortech V-1 and V-2 supercharger, the Vortech V-3 does NOT require any oil lines to feed the supercharger gears with oil. The Vortech V-3 supercharger has an internally lubricated transmission. This internal lubricated gear case requires for the supercharger oil to be changed with Vortech’s special supercharger oil. The Vortech V-3 supercharger also comes with helical gears to make the overall gear noise quiet, but still allows you to hear the sweet whine sound that we all love about superchargers.
Now that we got the transmissions out of the way, it is time to talk about the labeling of their impellers and compressor size.
Vortech is known for having one of the most diverse selections of supercharger compressors around. Vortech makes well over 15-difference sizes of superchargers all in which have different power bans depending on ones vehicle needs. The most common ones are Si-Trim, T-Trim, and YSi-Trim.
The SCi-Trim is one of Vortech’s smaller type superchargers. These are commonly found in smaller displacement engines and some entry-level supercharger kits. The SCi-Trim does come in a V-1, V-2, and V-3 transmission.
The Vortech Si-Trim is by far Vortech’s most commonly used supercharger. These superchargers are great for both street and strip use. You will find these in their Mustang 4.6L & 5.0L supercharger kit, Vortech’s 5.7L & 6.1L Dodge and Chrysler Hemi kits, and Vortech’s Hummer H2 supercharger systems. The Si-Trim also comes in a V-1, V-2, and V-3 transmission.
For those seeking more power for street and strip, Vortech makes a T-Trim for these power seekers. The T-Trim really shines for those who have a modified engine that flows good and are seeking to run boost levels in the 12-18 psi range. The Vortech T-Trim is normally the next blower size up from the Si-Trim once people max it the Si-Trim. The T-Tim only comes in two types of transmissions, which is V-1 heavy-duty, or V-2 also known as a “TSQ”. The V-2 version is a non heavy-duty transmission, which means it is not idea for cog pulleys.
- Note: Due to the weight/dimensions of this item, additional freight charges will be applied at checkout.
Please use the drop down menu above to make your Corvette year, engine, finish, pulley, 8 rib upgrade, and trim selection.
This item does not qualify for free shipping.