Micro Starter Accessories

The Micro Starter Harness Kit was made so that a driver can easily jump start their car using just the unit without the need for the clamps. This 12 inch harness connects directly to the battery while the other end plugs directly into the Micro Starter.

Also included in the kit is an adapter that converts the Micro Starter Harness (blue connector) down to an SAE Connector (Battery Tender type), so you can easily hook up your battery charger and eliminate the standard SAE harness you might have.

A standard Battery Tender type Harness WILL NOT handle jump-starting as the wire gauge is much to thin and it will melt the wires.

Micro Starter Memory Saver XP1


Never again lug around the big, heavy and bulky jump starter to keep the power to your vehicle's ODB port while you change the battery. With this cable you can just take your pocket sized Micro Starter and use it as the power supply to keep all the settings in your car while you change the battery.

• Please note: This will not work with the Micro Starter XP3 since that model only has USB ports.

Micro Starter Replacement Clamps

These are a set of Micro Starter Replacement Clamps. They have a built-in diode to prevent back-charge to the Micro Starter from your car.

• PLEASE NOTE: The Micro Starter is for jump-starting ONLY through the jump start port. NEVER leave the Micro Starter connected to your automobile battery for longer than 30 seconds or use in place of your regular battery. DO NOT try to charge the Micro Starter directly from your battery through the jump start port. SEVERE DAMAGE CAN RESULT.