Unfortunately, not every situation can be avoided, but now you can put some control back in your hands with the Rear Anti Collision Driving Caution Light.
Made from an aluminum alloy, the Anti Collision LED includes a set of simple instructions that make it very easy to install, replace, and use. Simply connect the light to your license plate line or any other light line on the back of your car. Then stick the 3M to the license plate, and mount the LED using the included screw. Finally, adjust the angle until you have the safety distance you want.
This light was designed for use in dark, foggy, rainy, and other hard-to-see-in conditions, so that other drivers can more easily see your vehicle because the Anti Collision Light casts a larger amount of light for a longer distance than even the brightest taillights.
- Material: Aluminum Alloy
- Color: Black
- Rated Input Voltage: 12 V - 24 V
- Laser Wavelength: Red - 650 nmiA 5 nm
- Working Temperature: -4 Fahrenheit to 158 Fahrenheit (-20 Centigrade to 70 Centigrade)
- Luminous Flux: 720 LM
- Circuit Protection Test: Pass
While installing and using the Anti Collision LED, please do not shine the light directly into your eyes, and please do not block the license plate in the area around the light's installation. This can only be used with 12 V to 24 V, so if your car does not produce voltage in that range, you cannot install it.